The SS466A from HONEYWELL manufacturer is a Magnetic Sensors - Switches (Solid State) with SS400 Series Latching Hall-Effect Digital Position Sensor; radial lead IC package,Board Mount Hall Effect / Magnetic Sensors 20mA Latch 5V/9V/ 12V/15V/18V/24V 3Pin.
The SS466A is SS400 Series position sensors have a thermally balanced integrated circuit over full temperature range. The negative compensation slope is optimized to match the negative temperature coefficient of lower cost magnets. Bipolar,latching and unipolar magnetics are available. Band gap regulation provides extremely stable operation over 3.8 Vdc to 30 Vdc supply voltage range. NOTE: Interruption of power to a latching device may cause the output to change state when power is restored. If a magnetic fi HALL EFFECT SENSOR, BIPOLAR, TO-92-3 Sensor: Hall effect; Range: -18 to 18mT; Usup:3.8 to 30VDC; 2 Hall Effect Sensor 20mA Bipolar Latch 5V/9V/12V/15V/18V/24V 3-Pin Bag Hall-effect sensor SS400 Series position sensors have a thermally balanced integrated circuit over full temperature range. The negative compensation slope is optimized to match the negative temperature coefficient of lower cost magnets. Bipolar,latching and unipolar magn # SENSOR,HALL,MAGNETIC FIELD, COMMERCIAL,DO-35,SD<> Hall Effect Magnetic Sensor; Operate Point Max:180G; Operate Point Min:-180G; Package/Case:TO-92; Release Point Min:-140G; Supply Voltage Max:24VDC; Supply Voltage Min:3.8VDC; Current Rating:7.5mA; Mounting Type:Through Hole ;RoHS Compliant: Yes Commercial Solid State/Magnet Honeywell Commercial Solid State/Magnet SENSOR, HALL EFFECT; Max Operating Magnetic Force:180G; Min Differential Magnetic Force:200G; Min Magnetic Release Force:-180G; No. of Pins:3; Output Configuration:Sink; Output Current:50mA; Sensor Housing:Rectangular; Sensor Type:Latching Bi-Polar± 180 Gauss; Series:SS400; Speed, Switching:1.5s; Temp, Op. Max:150°C; Temp, Op. Min:-40°C; Termination Type:Through Hole; Voltage, Output Max:0.4V; Voltage, Supply DC Max:30V Sensor; Sink; 14.0 mT (140 G) (Typ.); 3.8 to 30.0 VDC; 7.5 mA (Typ.) HALL EFFECT SENSOR Hall Effect Sensor 20mA Latch 5V/9V/12V/15V/18V/24V 3-Pin Bag MAGNETIC SWITCH LATCH RADIAL HallSwitch Latch Sensor latching 180gauss 3.8-24Vdc 20MA LATCH 5V9V12V15V18V24V Sensors, Magnetic Position Sensors, PCB level Position Sensors (Miniature Plastic package) . More details for SS466A can be seen below.
Details
SS400 Series position sensors have a thermally balanced integrated circuit over full temperature range. The negative compensation slope is optimized to match the negative temperature coefficient of lower cost magnets. Bipolar,latching and unipolar magnetics are available. Band gap regulation provides extremely stable operation over 3.8 Vdc to 30 Vdc supply voltage range. NOTE: Interruption of power to a latching device may cause the output to change state when power is restored. If a magnetic fi
HALL EFFECT SENSOR, BIPOLAR, TO-92-3
Sensor: Hall effect; Range: -18 to 18mT; Usup:3.8 to 30VDC; 2
Hall Effect Sensor 20mA Bipolar Latch 5V/9V/12V/15V/18V/24V 3-Pin Bag
Hall-effect sensor
SS400 Series position sensors have a thermally balanced integrated circuit over full temperature range. The negative compensation slope is optimized to match the negative temperature coefficient of lower cost magnets. Bipolar,latching and unipolar magn
# SENSOR,HALL,MAGNETIC FIELD, COMMERCIAL,DO-35,SD<>
Hall Effect Magnetic Sensor; Operate Point Max:180G; Operate Point Min:-180G; Package/Case:TO-92; Release Point Min:-140G; Supply Voltage Max:24VDC; Supply Voltage Min:3.8VDC; Current Rating:7.5mA; Mounting Type:Through Hole ;RoHS Compliant: Yes
Commercial Solid State/Magnet
Honeywell Commercial Solid State/Magnet
SENSOR, HALL EFFECT; Max Operating Magnetic Force:180G; Min Differential Magnetic Force:200G; Min Magnetic Release Force:-180G; No. of Pins:3; Output Configuration:Sink; Output Current:50mA; Sensor Housing:Rectangular; Sensor Type:Latching Bi-Polar± 180 Gauss; Series:SS400; Speed, Switching:1.5s; Temp, Op. Max:150°C; Temp, Op. Min:-40°C; Termination Type:Through Hole; Voltage, Output Max:0.4V; Voltage, Supply DC Max:30V
Sensor; Sink; 14.0 mT (140 G) (Typ.); 3.8 to 30.0 VDC; 7.5 mA (Typ.)
HALL EFFECT SENSOR
Hall Effect Sensor 20mA Latch 5V/9V/12V/15V/18V/24V 3-Pin Bag
MAGNETIC SWITCH LATCH RADIAL
HallSwitch Latch
Sensor latching 180gauss 3.8-24Vdc
20MA LATCH 5V9V12V15V18V24V
Sensors, Magnetic Position Sensors, PCB level Position Sensors (Miniature Plastic package)
- Categories
- Transistors
- Manufacturer
- Honeywell Solid State Electronics Center
- Veswin Part Number
- V1070-SS466A
- Lead Free Status / RoHS Status
- Lead free / RoHS Compliant
- Condition
- New & Original - Factory Package
- Stock Status
- In-Stock Inventory
- Minimum order
- 1
- Estimated Delivery Time
- On May 03 - May 08 (Choose Expedited Shipping)
- EDA / CAD Models
- SS466A by SnapEDA
- Storage Condition
- Dry storage cabinet & Humidity protection package
- Voltage Supply
- 3.8 V ~ 30 V
- Type
- Bipolar Hall Effect Latch Sensor
- Test Condition
- 25°C
- Technology
- Hall Effect
- Supply Voltage Min
- 3.8 VDC
- Supply Voltage Max
- 30 VDC
- Supplier Device Package
- Radial Lead
- Series
- SS400
- Sensing Range
- 18mT Trip, -18mT Release
- Polarization
- South Pole
- Packaging
- Bulk Alternate Packaging
- Package Case
- TO-226-3, TO-92-3 Short Body
- Output Type
- Open Collector
- Operating Temperature
- -40°C ~ 150°C (TA)
- Operating Supply Voltage
- 12 V
- Operating Supply Current
- 10 mA
- Mounting Style
- Through Hole
- Minimum Operating Temperature
- - 40 C
- Maximum Output Current
- 20 mA
- Maximum Operating Temperature
- + 150 C
- Function
- Latch
- Features
- Temperature Compensated
- Current Supply Max
- 10mA
- Current Output Max
- 20mA
Looking for SS466A? Welcome to Veswin.com, Our Sales are here to help you. You can get components availability and pricing for SS466A,
view detailed information that including SS466A manufacturer and datasheets. You can buy or learn about SS466A right here, right now.
Veswin is an electronic component distributor for commodity, common, obsolete / hard to find electronic components. Veswin supplies Industrial,
Commercial and Mil-Spec components to OEM customers, CEM customers and Repair Centers worldwide. We maintain a large inventory of electronic components,
which may include SS466A, on hand to ship same day or short lead-time. Veswin Company is a full service SS466A supplier and distributor for SS466A.
We have the ability to source and provide the SS466A globally to assist you with your electronic component supply chain. now!
- Q: How To Order SS466A?
- A: Please click on the "Add to Cart" Button and then proceed to checkout.
- Q: How To Pay for SS466A?
- A: We accept T/T(Bank wire), Paypal, Credit card Payment through PayPal.
- Q: How Long Can I Get The SS466A?
-
A: We will ship via FedEx or DHL or UPS, Normally will take 4 or 5 days to arrive at your office.
We can also ship via registered airmail, Normally will take 14-38 days to arrive at your office.
Please choose your preferred shipping method when checking out on our website.
- Q: SS466A Warranty?
- A: We Provide 90 days warranty for our product.
- Q: SS466A Technical Support?
-
A: Yes, Our product technical engineer will help you with the SS466A pinout information, application notes, replacement,
datasheet in pdf, manual, schematic, equivalent, cross reference.
VESWIN ELECTRONICS QUALITY ASSURANCE
![ISO 9001 standards]()
Quality Systems Registrar, certified Veswin Electronics to ISO 9001 standards. Our systems and compliance with the standards have been, and continue to be, regularly reviewed and tested to maintain continuous conformance.
ISO CERTIFICATION
The ISO registration gives you an assurance that Veswin Electronics's systems are accurate, comprehensive and conform to the rigorous requirements of the ISO standard. These requirements ensure Veswin Electronics's long-term commitment to continuous improvements.
Note: We do our best to ensure correct product data appears on our website. Please refer to the product datasheet/catalog for confirmed specifications from the manufacturer before ordering. If you spot an error, please notify us.
Quality Systems Registrar, certified Veswin Electronics to ISO 9001 standards. Our systems and compliance with the standards have been, and continue to be, regularly reviewed and tested to maintain continuous conformance.
