The SS411A from HONEYWELL manufacturer is a Magnetic Sensors - Hall Effect, Digital Switch, Linear, Compass (ICs) with Interactive Catalog Replaces Catalog Page.
The SS411A is SS400 Series position sensors have a thermally balanced integrated circuit over full temperature range. The negative compensation slope is optimized to match the negative temperature coefficient of lower cost magnets. Bipolar,latching and unipolar magnetics are available. Band gap regulation provides extremely stable operation over 3.8 Vdc to 30 Vdc supply voltage range. NOTE: Interruption of power to a latching device may cause the output to change state when power is restored. If a magnetic fi IC, HALL EFFECT SENSOR, BIPOLAR, TO-92-3 Sensor: Hall effect; Range: -6 to 6mT; Usup:3.8 to 30VDC; 20m Hall Effect Sensor 20mA Bipolar 5V/9V/12V/15V/18V/24V 3-Pin Hall Effect Switch SIP SENSOR, HALL EFFECT; Sensor Terminals:Through Hole; Output Voltage Min:400mV; Supply Voltage Range DC:3.8V to 30V; Output Configuration:Sink; Sensor Housing:Rectangular; Switching Speed:1.5s; SVHC:No SVHC (20-Jun-2011); Differential Magnetic Force Min:15G; Magnetic Release Force Min:-60G; No. of Pins:3; Operating Magnetic Force Max:60G; Operating Temperature Max:150°C; Operating Temperature Min:-40°C; Output Current:50mA; Output Voltage Max:0.4V; Sensor Type:Hall Effect; Series:SS400; Supply Vo SS400 Series position sensors have a thermally balanced integrated circuit over full temperature range. The negative compensation slope is optimized to match the negative temperature coefficient of lower cost magnets. Bipolar,latching and unipolar magn Hall Effect Magnetic Sensor; Operate Point Max:60G; Operate Point Min:-60G; Package/Case:TO-92; Release Point Min:-20G; Supply Voltage Max:24VDC; Supply Voltage Min:3.8VDC; Current Rating:7.5mA; Mounting Type:Through Hole ;RoHS Compliant: Yes Commercial Solid State/Magnet Honeywell Commercial Solid State/Magnet MAGNETIC FIELD SENSOR-HALL DO-41 1.0A 600V ROHS 5K<> SENSOR|HALL EFFECT Sensor; Hall Effect; SS400 Series; Digital Position; Radial lead IC Hall Effect Sensor 20mA Bipolar 5V/9V/12V/15V/18V/24V 3-Pin Bag MAGNETIC SWITCH BIPOLAR RADIAL HallSwitch Bipolar Sensor bipolar 60gauss 3.8-24Vdc Sensors, Magnetic Position Sensors, PCB level Position Sensors (Miniature Plastic package) Temperature Compensated D . More details for SS411A can be seen below.
Details
SS400 Series position sensors have a thermally balanced integrated circuit over full temperature range. The negative compensation slope is optimized to match the negative temperature coefficient of lower cost magnets. Bipolar,latching and unipolar magnetics are available. Band gap regulation provides extremely stable operation over 3.8 Vdc to 30 Vdc supply voltage range. NOTE: Interruption of power to a latching device may cause the output to change state when power is restored. If a magnetic fi
IC, HALL EFFECT SENSOR, BIPOLAR, TO-92-3
Sensor: Hall effect; Range: -6 to 6mT; Usup:3.8 to 30VDC; 20m
Hall Effect Sensor 20mA Bipolar 5V/9V/12V/15V/18V/24V 3-Pin
Hall Effect Switch SIP
SENSOR, HALL EFFECT; Sensor Terminals:Through Hole; Output Voltage Min:400mV; Supply Voltage Range DC:3.8V to 30V; Output Configuration:Sink; Sensor Housing:Rectangular; Switching Speed:1.5s; SVHC:No SVHC (20-Jun-2011); Differential Magnetic Force Min:15G; Magnetic Release Force Min:-60G; No. of Pins:3; Operating Magnetic Force Max:60G; Operating Temperature Max:150°C; Operating Temperature Min:-40°C; Output Current:50mA; Output Voltage Max:0.4V; Sensor Type:Hall Effect; Series:SS400; Supply Vo
SS400 Series position sensors have a thermally balanced integrated circuit over full temperature range. The negative compensation slope is optimized to match the negative temperature coefficient of lower cost magnets. Bipolar,latching and unipolar magn
Hall Effect Magnetic Sensor; Operate Point Max:60G; Operate Point Min:-60G; Package/Case:TO-92; Release Point Min:-20G; Supply Voltage Max:24VDC; Supply Voltage Min:3.8VDC; Current Rating:7.5mA; Mounting Type:Through Hole ;RoHS Compliant: Yes
Commercial Solid State/Magnet
Honeywell Commercial Solid State/Magnet
MAGNETIC FIELD SENSOR-HALL DO-41 1.0A 600V ROHS 5K<>
SENSOR|HALL EFFECT
Sensor; Hall Effect; SS400 Series; Digital Position; Radial lead IC
Hall Effect Sensor 20mA Bipolar 5V/9V/12V/15V/18V/24V 3-Pin Bag
MAGNETIC SWITCH BIPOLAR RADIAL
HallSwitch Bipolar
Sensor bipolar 60gauss 3.8-24Vdc
Sensors, Magnetic Position Sensors, PCB level Position Sensors (Miniature Plastic package)
Temperature Compensated D
- Categories
- Transistors
- Manufacturer
- Honeywell Solid State Electronics Center
- Veswin Part Number
- V1070-SS411A
- Lead Free Status / RoHS Status
- Lead free / RoHS Compliant
- Condition
- New & Original - Factory Package
- Stock Status
- In-Stock Inventory
- Minimum order
- 1
- Estimated Delivery Time
- On May 03 - May 08 (Choose Expedited Shipping)
- EDA / CAD Models
- SS411A by SnapEDA
- Storage Condition
- Dry storage cabinet & Humidity protection package
- Voltage Supply
- 3.8 V ~ 30 V
- Type
- Bipolar Hall Effect Latch Sensor
- Test Condition
- 25°C
- Technology
- Hall Effect
- Supply Voltage Min
- 3.8 VDC
- Supply Voltage Max
- 30 VDC
- Supplier Device Package
- Radial Lead
- Series
- SS400
- Sensing Range
- 6mT Trip, -6mT Release
- Polarization
- South Pole
- Packaging
- Bulk
- Package Case
- TO-226-3, TO-92-3 (TO-226AA)
- Output Type
- Open Collector
- Operating Temperature
- -40°C ~ 150°C (TA)
- Operating Supply Voltage
- 12 V
- Operating Supply Current
- 10 mA
- Mounting Style
- Through Hole
- Minimum Operating Temperature
- - 40 C
- Maximum Output Current
- 20 mA
- Maximum Operating Temperature
- + 150 C
- Function
- Bipolar Switch
- Features
- Temperature Compensated
- Current Supply Max
- 10mA
- Current Output Max
- 20mA
Looking for SS411A? Welcome to Veswin.com, Our Sales are here to help you. You can get components availability and pricing for SS411A,
view detailed information that including SS411A manufacturer and datasheets. You can buy or learn about SS411A right here, right now.
Veswin is an electronic component distributor for commodity, common, obsolete / hard to find electronic components. Veswin supplies Industrial,
Commercial and Mil-Spec components to OEM customers, CEM customers and Repair Centers worldwide. We maintain a large inventory of electronic components,
which may include SS411A, on hand to ship same day or short lead-time. Veswin Company is a full service SS411A supplier and distributor for SS411A.
We have the ability to source and provide the SS411A globally to assist you with your electronic component supply chain. now!
- Q: How To Order SS411A?
- A: Please click on the "Add to Cart" Button and then proceed to checkout.
- Q: How To Pay for SS411A?
- A: We accept T/T(Bank wire), Paypal, Credit card Payment through PayPal.
- Q: How Long Can I Get The SS411A?
-
A: We will ship via FedEx or DHL or UPS, Normally will take 4 or 5 days to arrive at your office.
We can also ship via registered airmail, Normally will take 14-38 days to arrive at your office.
Please choose your preferred shipping method when checking out on our website.
- Q: SS411A Warranty?
- A: We Provide 90 days warranty for our product.
- Q: SS411A Technical Support?
-
A: Yes, Our product technical engineer will help you with the SS411A pinout information, application notes, replacement,
datasheet in pdf, manual, schematic, equivalent, cross reference.
VESWIN ELECTRONICS QUALITY ASSURANCE
![ISO 9001 standards]()
Quality Systems Registrar, certified Veswin Electronics to ISO 9001 standards. Our systems and compliance with the standards have been, and continue to be, regularly reviewed and tested to maintain continuous conformance.
ISO CERTIFICATION
The ISO registration gives you an assurance that Veswin Electronics's systems are accurate, comprehensive and conform to the rigorous requirements of the ISO standard. These requirements ensure Veswin Electronics's long-term commitment to continuous improvements.
Note: We do our best to ensure correct product data appears on our website. Please refer to the product datasheet/catalog for confirmed specifications from the manufacturer before ordering. If you spot an error, please notify us.
Quality Systems Registrar, certified Veswin Electronics to ISO 9001 standards. Our systems and compliance with the standards have been, and continue to be, regularly reviewed and tested to maintain continuous conformance.
