The SS441A from HONEYWELL manufacturer is a Magnetic Sensors - Hall Effect, Digital Switch, Linear, Compass (ICs) with Hall Effect Sensor 20mA Unipolar 5V/9V/12V/15V/18V/24V.
The SS441A is SS400 Series position sensors have a thermally balanced integrated circuit over full temperature range. The negative compensation slope is optimized to match the negative temperature coefficient of lower cost magnets. Bipolar,latching and unipolar magnetics are available. Band gap regulation provides extremely stable operation over 3.8 Vdc to 30 Vdc supply voltage range. NOTE: Interruption of power to a latching device may cause the output to change state when power is restored. If a magnetic fi Sensor: Hall effect; Range:2 to 11,5mT; Usup:3.8 to 30VDC; 20 SENSOR,UNIPOLAR HALL EFFECT PO,DO-41 1.0A 1000V 5,<> Hall Effect Sensor 20mA Unipolar 5V/9V/12V/15V/18V/24V 3-Pin Hall Effect Switch SIP SENSOR, HALL EFFECT; Sensor Terminals:Pin; Supply Voltage Range DC:3.8V to 30V; Output Configuration:Sink; Sensor Housing:Rectangular; Switching Speed:1.5s; SVHC:No SVHC (20-Jun-2011); Differential Magnetic Force Min:20G; Magnetic Release Force Min:20G; No. of Pins:3; Operating Magnetic Force Max:115G; Operating Temperature Max:150°C; Operating Temperature Min:-40°C; Output Current:50mA; Output Voltage Max:0.4V; Sensor Type:Hall Effect; Series:SS400; Supply Voltage DC Max:30V; Termination Type: SS400 Series position sensors have a thermally balanced integrated circuit over full temperature range. The negative compensation slope is optimized to match the negative temperature coefficient of lower cost magnets. Bipolar,latching and unipolar magn Hall Effect Magnetic Sensor; Operate Point Max:115G; Operate Point Min:20G; Package/Case:TO-92; Release Point Min:55G; Supply Voltage Max:24VDC; Supply Voltage Min:3.8VDC; Current Rating:7.5mA; Mounting Type:Through Hole ;RoHS Compliant: Yes Commercial Solid State/Magnet Honeywell Commercial Solid State/Magnet SENSOR, HALL EFFECT; Max Operating Magnetic Force:115G; Min Differential Magnetic Force:20G; Min Magnetic Release Force:20G; No. of Pins:3; Output Configuration:Sink; Output Current:50mA; Sensor Housing:Rectangular; Sensor Type:Unipolar 115 Gauss@25°C; Series:SS400; Speed, Switching:1.5s; Temp, Op. Max:150°C; Temp, Op. Min:-40°C; Termination Type:Through Hole; Voltage, Output Max:0.4V; Voltage, Supply DC Max:30V HALL EFFECT SENSOR DIGITAL POSITION PLASTIC PACKAGE CURRENT SINK OUT .59IN LEADS UNIPOLAR 3.8-30 VDC SUPPLY VOLTAGE OPERATE AT 8IN Sensor; Unipolar Hall Effect; Digital Position; Radial Lead IC Package Hall Effect Sensor 20mA Unipolar 5V/9V/12V/15V/18V/24V 3-Pin Bag MAGNETIC SWITCH UNIPOLAR RADIAL HallSwitch Unipolar Honeywell Digital Unipolar Hall Effect Sensor 20MA UNIPOLAR 5V9V12V15V18V24V Sensors, Magnetic Position Sensors, PCB level Position Sensors (Miniature Plastic package) . More details for SS441A can be seen below.
Details
SS400 Series position sensors have a thermally balanced integrated circuit over full temperature range. The negative compensation slope is optimized to match the negative temperature coefficient of lower cost magnets. Bipolar,latching and unipolar magnetics are available. Band gap regulation provides extremely stable operation over 3.8 Vdc to 30 Vdc supply voltage range. NOTE: Interruption of power to a latching device may cause the output to change state when power is restored. If a magnetic fi
Sensor: Hall effect; Range:2 to 11,5mT; Usup:3.8 to 30VDC; 20
SENSOR,UNIPOLAR HALL EFFECT PO,DO-41 1.0A 1000V 5,<>
Hall Effect Sensor 20mA Unipolar 5V/9V/12V/15V/18V/24V 3-Pin
Hall Effect Switch SIP
SENSOR, HALL EFFECT; Sensor Terminals:Pin; Supply Voltage Range DC:3.8V to 30V; Output Configuration:Sink; Sensor Housing:Rectangular; Switching Speed:1.5s; SVHC:No SVHC (20-Jun-2011); Differential Magnetic Force Min:20G; Magnetic Release Force Min:20G; No. of Pins:3; Operating Magnetic Force Max:115G; Operating Temperature Max:150°C; Operating Temperature Min:-40°C; Output Current:50mA; Output Voltage Max:0.4V; Sensor Type:Hall Effect; Series:SS400; Supply Voltage DC Max:30V; Termination Type:
SS400 Series position sensors have a thermally balanced integrated circuit over full temperature range. The negative compensation slope is optimized to match the negative temperature coefficient of lower cost magnets. Bipolar,latching and unipolar magn
Hall Effect Magnetic Sensor; Operate Point Max:115G; Operate Point Min:20G; Package/Case:TO-92; Release Point Min:55G; Supply Voltage Max:24VDC; Supply Voltage Min:3.8VDC; Current Rating:7.5mA; Mounting Type:Through Hole ;RoHS Compliant: Yes
Commercial Solid State/Magnet
Honeywell Commercial Solid State/Magnet
SENSOR, HALL EFFECT; Max Operating Magnetic Force:115G; Min Differential Magnetic Force:20G; Min Magnetic Release Force:20G; No. of Pins:3; Output Configuration:Sink; Output Current:50mA; Sensor Housing:Rectangular; Sensor Type:Unipolar 115 Gauss@25°C; Series:SS400; Speed, Switching:1.5s; Temp, Op. Max:150°C; Temp, Op. Min:-40°C; Termination Type:Through Hole; Voltage, Output Max:0.4V; Voltage, Supply DC Max:30V
HALL EFFECT SENSOR DIGITAL POSITION PLASTIC PACKAGE CURRENT SINK OUT .59IN LEADS UNIPOLAR 3.8-30 VDC SUPPLY VOLTAGE OPERATE AT 8IN
Sensor; Unipolar Hall Effect; Digital Position; Radial Lead IC Package
Hall Effect Sensor 20mA Unipolar 5V/9V/12V/15V/18V/24V 3-Pin Bag
MAGNETIC SWITCH UNIPOLAR RADIAL
HallSwitch Unipolar
Honeywell Digital Unipolar Hall Effect Sensor
20MA UNIPOLAR 5V9V12V15V18V24V
Sensors, Magnetic Position Sensors, PCB level Position Sensors (Miniature Plastic package)
- Categories
- Transistors
- Manufacturer
- Honeywell Solid State Electronics Center
- Veswin Part Number
- V1070-SS441A
- Lead Free Status / RoHS Status
- Lead free / RoHS Compliant
- Condition
- New & Original - Factory Package
- Stock Status
- In-Stock Inventory
- Minimum order
- 1
- Estimated Delivery Time
- On May 03 - May 08 (Choose Expedited Shipping)
- EDA / CAD Models
- SS441A by SnapEDA
- Storage Condition
- Dry storage cabinet & Humidity protection package
- Voltage Supply
- 3.8 V ~ 30 V
- Type
- Unipolar
- Test Condition
- 25°C
- Technology
- Hall Effect
- Supply Voltage Min
- 3.8 VDC
- Supply Voltage Max
- 30 VDC
- Supplier Device Package
- Radial Lead
- Series
- SS400
- Sensing Range
- 11.5mT Trip, 2mT Release
- Polarization
- South Pole
- Packaging
- Bulk Alternate Packaging
- Package Case
- TO-262-3 Short Leads, I2Pak
- Output Type
- Open Collector
- Operating Temperature
- -40°C ~ 150°C (TA)
- Operating Supply Voltage
- 12 V
- Operating Supply Current
- 10 mA
- Mounting Style
- Through Hole
- Minimum Operating Temperature
- - 40 C
- Maximum Output Current
- 20 mA
- Maximum Operating Temperature
- + 150 C
- Function
- Unipolar Switch
- Features
- Temperature Compensated
- Current Supply Max
- 10mA
- Current Output Max
- 20mA
Looking for SS441A? Welcome to Veswin.com, Our Sales are here to help you. You can get components availability and pricing for SS441A,
view detailed information that including SS441A manufacturer and datasheets. You can buy or learn about SS441A right here, right now.
Veswin is an electronic component distributor for commodity, common, obsolete / hard to find electronic components. Veswin supplies Industrial,
Commercial and Mil-Spec components to OEM customers, CEM customers and Repair Centers worldwide. We maintain a large inventory of electronic components,
which may include SS441A, on hand to ship same day or short lead-time. Veswin Company is a full service SS441A supplier and distributor for SS441A.
We have the ability to source and provide the SS441A globally to assist you with your electronic component supply chain. now!
- Q: How To Order SS441A?
- A: Please click on the "Add to Cart" Button and then proceed to checkout.
- Q: How To Pay for SS441A?
- A: We accept T/T(Bank wire), Paypal, Credit card Payment through PayPal.
- Q: How Long Can I Get The SS441A?
-
A: We will ship via FedEx or DHL or UPS, Normally will take 4 or 5 days to arrive at your office.
We can also ship via registered airmail, Normally will take 14-38 days to arrive at your office.
Please choose your preferred shipping method when checking out on our website.
- Q: SS441A Warranty?
- A: We Provide 90 days warranty for our product.
- Q: SS441A Technical Support?
-
A: Yes, Our product technical engineer will help you with the SS441A pinout information, application notes, replacement,
datasheet in pdf, manual, schematic, equivalent, cross reference.
VESWIN ELECTRONICS QUALITY ASSURANCE
Quality Systems Registrar, certified Veswin Electronics to ISO 9001 standards. Our systems and compliance with the standards have been, and continue to be, regularly reviewed and tested to maintain continuous conformance.
ISO CERTIFICATION
The ISO registration gives you an assurance that Veswin Electronics's systems are accurate, comprehensive and conform to the rigorous requirements of the ISO standard. These requirements ensure Veswin Electronics's long-term commitment to continuous improvements.
Note: We do our best to ensure correct product data appears on our website. Please refer to the product datasheet/catalog for confirmed specifications from the manufacturer before ordering. If you spot an error, please notify us.