The 2SS52M from HONEYWELL manufacturer is a Magnetic Sensors - Switches (Solid State) with 2SS52M Series Omnipolar Magnetoresistive Sensor; radial lead IC package,Board Mount Hall Effect / Magnetic Sensors 20mA Omnipolar radial lead IC pkg.
The 2SS52M is 2SS52M Series magnetoresistive omnipolar sensor IC, U-pack, straight leads, 1000 units/bulk The 2SS52M Series Digital Magnetoresistive Sensors are omnipolar, solid-state sensors with a built-in magnetoresistive bridge integrated on silicon and encapsulated in a plastic package. The integrated circuit also includes a band-gap regulator and a digital output in response to very low magnetic fields. These sensor ICs may be operated with either a North or a South magnetic pole applied in parallel to MICRO SWITCHTL Series toggle switches have high strength, temperature resistant, non-tracking case material & silver cadmium oxide contacts. Pull-to-Unlock toggle levers prevent accidental operation; the lever must be pulled approx. 2,3 mm (0.09 inches) to change positions. Sensor: magnetic field sensor 2SS Series position sensors have magnetoresistive material integrated on silicon and encapsulated in a plastic package. The integrated circuit provides a digital output in response to very low magnetic fields. Though this signal is identical to our digital Hall effect sensors, it can be achieved by magnetoresistive sensors at much greater sensor-to-magnet distances. Product Highlights: Low gauss operation can extend sensing distance to one inch or more, depending on magnet size Digital current s Hall Effect Switch SENSOR, MAGNETORESISTIVE; Magnetometer Measuring Range:4G to 25G; SVHC:No SVHC (19-Dec-2011); Frequency Response Max:100kHz; No. of Pins:3; Operating Magnetic Force Max:25G; Operating Temperature Max:125°C; Operating Temperature Min:-40°C; Operating Temperature Range:-40°C to +150°C; Output Current:20mA; Sensor Housing:Rectangular; Series:2SS52M; Supply Voltage DC Max:30V; Supply Voltage Min:3.8V; Supply Voltage Range:3.8V DC to 30V DC 2SS Series position sensors have magnetoresistive material integrated on silicon and encapsulated in a plastic package. The integrated circuit provides a digital output in response to very low magnetic fields. Though this signal is identical to our digita Commercial Solid State/Magnet SENSOR, MAGNETORESISTIVE; Frequency Response, Upper Limit:100kHz; Max Operating Magnetic Force:15G; No. of Pins:3; Output Current:20mA; Sensor Housing:Rectangular; Series:2SS52M; Temp, Op. Max:125°C; Temp, Op. Min:-40°C; Voltage, Supply DC Max:30V; Voltage, Supply Max:24V; Voltage, Supply Min:6V 3.8-30VDC PCB TERMINALS Magnetic Sensor; Sensor Input:Magnetic; Sensor Output:NPN; Switch Terminals:Through Hole; Leaded Process Compatible:Yes; Magnetic Field Max:15G; Magnetic Field Min:9G; Mounting Type:Through Hole; Output Type:Sink ;RoHS Compliant: Yes HALL EFFECT SENSOR DIGITAL POSITION PLASTIC PACKAGE CURRENT SINK OUT 3 PIN SIP OMNIPOLAR 3.8-30 VDC SUPPLY VOLTAGE OPERATE AT MAGNETIC SWITCH OMNIPOLAR TO92-3 Magnetoresistive Sensor 3-Pin Bulk Magneto Resistive Sens. Digital HALL EFFECT SENSOR 2SS52 2SS52M SERIES OMNIPOLAR MAGNETORESISTIVE SENSOR IC; RADIAL LEAD IC PACKAGE Sensor; Magnetoresistive Digital Position; PC Board; 0.4 Vdc max Output Voltage 20MA OMNIPOL RADIAL LEAD ICPKG Sensors, Magnetic Position Sensors, PCB level Position Sensors (Miniature Plastic package) . More details for 2SS52M can be seen below.
Details
2SS52M Series magnetoresistive omnipolar sensor IC, U-pack, straight leads, 1000 units/bulk The 2SS52M Series Digital Magnetoresistive Sensors are omnipolar, solid-state sensors with a built-in magnetoresistive bridge integrated on silicon and encapsulated in a plastic package. The integrated circuit also includes a band-gap regulator and a digital output in response to very low magnetic fields. These sensor ICs may be operated with either a North or a South magnetic pole applied in parallel to
MICRO SWITCHTL Series toggle switches have high strength, temperature resistant, non-tracking case material & silver cadmium oxide contacts. Pull-to-Unlock toggle levers prevent accidental operation; the lever must be pulled approx. 2,3 mm (0.09 inches) to change positions.
Sensor: magnetic field sensor
2SS Series position sensors have magnetoresistive material integrated on silicon and encapsulated in a plastic package. The integrated circuit provides a digital output in response to very low magnetic fields. Though this signal is identical to our digital Hall effect sensors, it can be achieved by magnetoresistive sensors at much greater sensor-to-magnet distances. Product Highlights: Low gauss operation can extend sensing distance to one inch or more, depending on magnet size Digital current s
Hall Effect Switch
SENSOR, MAGNETORESISTIVE; Magnetometer Measuring Range:4G to 25G; SVHC:No SVHC (19-Dec-2011); Frequency Response Max:100kHz; No. of Pins:3; Operating Magnetic Force Max:25G; Operating Temperature Max:125°C; Operating Temperature Min:-40°C; Operating Temperature Range:-40°C to +150°C; Output Current:20mA; Sensor Housing:Rectangular; Series:2SS52M; Supply Voltage DC Max:30V; Supply Voltage Min:3.8V; Supply Voltage Range:3.8V DC to 30V DC
2SS Series position sensors have magnetoresistive material integrated on silicon and encapsulated in a plastic package. The integrated circuit provides a digital output in response to very low magnetic fields. Though this signal is identical to our digita
Commercial Solid State/Magnet
SENSOR, MAGNETORESISTIVE; Frequency Response, Upper Limit:100kHz; Max Operating Magnetic Force:15G; No. of Pins:3; Output Current:20mA; Sensor Housing:Rectangular; Series:2SS52M; Temp, Op. Max:125°C; Temp, Op. Min:-40°C; Voltage, Supply DC Max:30V; Voltage, Supply Max:24V; Voltage, Supply Min:6V
3.8-30VDC PCB TERMINALS
Magnetic Sensor; Sensor Input:Magnetic; Sensor Output:NPN; Switch Terminals:Through Hole; Leaded Process Compatible:Yes; Magnetic Field Max:15G; Magnetic Field Min:9G; Mounting Type:Through Hole; Output Type:Sink ;RoHS Compliant: Yes
HALL EFFECT SENSOR DIGITAL POSITION PLASTIC PACKAGE CURRENT SINK OUT 3 PIN SIP OMNIPOLAR 3.8-30 VDC SUPPLY VOLTAGE OPERATE AT
MAGNETIC SWITCH OMNIPOLAR TO92-3
Magnetoresistive Sensor 3-Pin Bulk
Magneto Resistive Sens. Digital
HALL EFFECT SENSOR 2SS52
2SS52M SERIES OMNIPOLAR MAGNETORESISTIVE SENSOR IC; RADIAL LEAD IC PACKAGE
Sensor; Magnetoresistive Digital Position; PC Board; 0.4 Vdc max Output Voltage
20MA OMNIPOL RADIAL LEAD ICPKG
Sensors, Magnetic Position Sensors, PCB level Position Sensors (Miniature Plastic package)
- Categories
- Transistors
- Manufacturer
- Honeywell Solid State Electronics Center
- Veswin Part Number
- V1070-2SS52M
- Lead Free Status / RoHS Status
- Lead free / RoHS Compliant
- Condition
- New & Original - Factory Package
- Stock Status
- In-Stock Inventory
- Minimum order
- 1
- Estimated Delivery Time
- On May 04 - May 09 (Choose Expedited Shipping)
- EDA / CAD Models
- 2SS52M by SnapEDA
- Storage Condition
- Dry storage cabinet & Humidity protection package
- Voltage Supply
- 3.8 V ~ 30 V
- Type
- Omnipolar
- Test Condition
- -40°C ~ 150°C
- Technology
- Magnetoresistive
- Supply Voltage Min
- 3.8 VDC
- Supply Voltage Max
- 30 VDC
- Supplier Device Package
- TO-92-3
- Series
- 2SS52M
- Sensing Range
- ±2.5mT Trip, ±0.5mT Release
- Release Point Min Max Brp
- 0.5 mT
- Polarization
- Either
- Packaging
- Bulk Alternate Packaging
- Package Case
- 3-SIP
- Output Voltage
- 0.4 VDC
- Output Type
- Open Collector
- Operating Temperature
- -40°C ~ 150°C (TA)
- Operating Supply Voltage
- 30 V
- Operating Supply Current
- 11 mA
- Operating Point Min Max
- 2.5 mT
- Mounting Style
- Through Hole
- Minimum Operating Temperature
- - 40 C
- Maximum Output Current
- 20 mA
- Maximum Operating Temperature
- + 150 C
- Function
- Omnipolar Switch
- Features
- -
- Current Supply Max
- 11mA
- Current Output Max
- 20mA
Looking for 2SS52M? Welcome to Veswin.com, Our Sales are here to help you. You can get components availability and pricing for 2SS52M,
view detailed information that including 2SS52M manufacturer and datasheets. You can buy or learn about 2SS52M right here, right now.
Veswin is an electronic component distributor for commodity, common, obsolete / hard to find electronic components. Veswin supplies Industrial,
Commercial and Mil-Spec components to OEM customers, CEM customers and Repair Centers worldwide. We maintain a large inventory of electronic components,
which may include 2SS52M, on hand to ship same day or short lead-time. Veswin Company is a full service 2SS52M supplier and distributor for 2SS52M.
We have the ability to source and provide the 2SS52M globally to assist you with your electronic component supply chain. now!
- Q: How To Order 2SS52M?
- A: Please click on the "Add to Cart" Button and then proceed to checkout.
- Q: How To Pay for 2SS52M?
- A: We accept T/T(Bank wire), Paypal, Credit card Payment through PayPal.
- Q: How Long Can I Get The 2SS52M?
-
A: We will ship via FedEx or DHL or UPS, Normally will take 4 or 5 days to arrive at your office.
We can also ship via registered airmail, Normally will take 14-38 days to arrive at your office.
Please choose your preferred shipping method when checking out on our website.
- Q: 2SS52M Warranty?
- A: We Provide 90 days warranty for our product.
- Q: 2SS52M Technical Support?
-
A: Yes, Our product technical engineer will help you with the 2SS52M pinout information, application notes, replacement,
datasheet in pdf, manual, schematic, equivalent, cross reference.
VESWIN ELECTRONICS QUALITY ASSURANCE
![ISO 9001 standards]()
Quality Systems Registrar, certified Veswin Electronics to ISO 9001 standards. Our systems and compliance with the standards have been, and continue to be, regularly reviewed and tested to maintain continuous conformance.
ISO CERTIFICATION
The ISO registration gives you an assurance that Veswin Electronics's systems are accurate, comprehensive and conform to the rigorous requirements of the ISO standard. These requirements ensure Veswin Electronics's long-term commitment to continuous improvements.
Note: We do our best to ensure correct product data appears on our website. Please refer to the product datasheet/catalog for confirmed specifications from the manufacturer before ordering. If you spot an error, please notify us.
Quality Systems Registrar, certified Veswin Electronics to ISO 9001 standards. Our systems and compliance with the standards have been, and continue to be, regularly reviewed and tested to maintain continuous conformance.
