Shopping Cart 0

Your shopping cart is empty! Please select the model you want to purchase first.
Product Name Manufacturer Unit Price Quantity Total
Quantity: 0 Total: $0.0
  • The difference between passive and active sensors
    The difference between passive and active sensors
    Source: Release time:2019-10-14 Click:2

    Read this article carefully and you will have an in-depth understanding of passive and active sensors.

    Details
  • What are the bad phenomena of PCBA processing and welding? Cause Analysis
    What are the bad phenomena of PCBA processing and welding? Cause Analysis
    Source: Release time:2019-10-10 Click:3

    In the welding process of PCBA processing, the worker is not operating properly or the solder material is not refined. The welding effect is not as expected. So what are the bad phenomena of PCBA processing and soldering? Bad soldering will cause circuit board faults? The following describes the solder joint defects and their causes.

    Details
  • Introduction to the advantages and functions of PCB flexible circuits
    Introduction to the advantages and functions of PCB flexible circuits
    Source: Release time:2019-10-09 Click:28

    PCB flexible circuits are designed to increase space utilization and product design flexibility to meet the design needs of smaller and higher density installations, as well as to reduce assembly processes and enhance reliability.

    Details
  • Compensation capacitor installation environment and technical requirements
    Compensation capacitor installation environment and technical requirements
    Source: Release time:2019-10-09 Click:7

    Capacitors should be installed in places where there is no corrosive gas, no steam, no severe vibration, shock, explosion, flammability, etc. You will get more information from this article.

    Details
  • What welding defects are caused by the environment?
    What welding defects are caused by the environment?
    Source: Release time:2019-09-30 Click:14

    Many smt processing manufacturers, in addition to fixing components in the solder joints of electronic product printed circuit boards, must be able to pass a certain amount of current stably and reliably. The quality of welding directly affects the quality of electronic products. So what are the environmental related welding defects?

    Details
  • What issues need to be considered when expanding the MCU system?
    What issues need to be considered when expanding the MCU system?
    Source: Release time:2019-09-30 Click:13

    The hardware circuit design of a single-chip application system consists of two parts: First, the system expansion, that is, the functional units inside the microcontroller, such as ROM, RAM, I/O, timer/counter, intermittent system, etc., cannot meet the requirements of the application system. It is necessary to expand off-chip, select the appropriate chip, and design the corresponding circuit.

    Details
  • What are the main factors affecting the cleaning effect of the electronic board?
    What are the main factors affecting the cleaning effect of the electronic board?
    Source: Release time:2019-09-30 Click:13

    In the PCBA patch processing factory, in order to make the cleaning of the printed circuit components smoothly and achieve good results, in addition to understanding the cleaning mechanism, cleaning agents and cleaning methods, it is also necessary to understand the main factors affecting the cleaning effect. You will find the answer from the article.

    Details
  • What is the role of film capacitors?
    What is the role of film capacitors?
    Source: Release time:2019-09-24 Click:22

    Film capacitors are also known as plastic film capacitors in their living environment. They mainly use plastic film as a dielectric. Due to the different electrical properties of the capacitor, it is also very diverse.

    Details
  • Three common problems with rectifier diodes
    Three common problems with rectifier diodes
    Source: Release time:2019-09-23 Click:18

    Three common problems with rectifier diodes, do you know what are them? so read the article carefull and you will get the answer.

    Details
  • How to use varistor correctly
    How to use varistor correctly
    Source: Release time:2019-09-21 Click:29

    The varistor is one of the necessary electronic components in the hands of engineers. The varistor can often be seen in LED switching power supplies or high-power power supplies.

    Details
  • Detonation sensor function and type
    Detonation sensor function and type
    Source: Release time:2019-09-16 Click:37

    The knocking sensor (KS) signal is used to determine if knocking has occurred and to retard the ignition advance angle during knocking. Detonation sensors are divided into two categories according to their working principles.

    Details
  • Strain sensor operation and application
    Strain sensor operation and application
    Source: Release time:2019-09-12 Click:22

    The strain gauge sensor is a functional component that converts a force into an electrical signal by a metal elastomer, and generally consists of a resistance strain gauge, an elastomer, and a transmission circuit.

    Details
  • How to use a combined sensor based on the application environment
    How to use a combined sensor based on the application environment
    Source: Release time:2019-09-03 Click:41

    Sensors that perform multiple functions—such as pressure sensors that provide temperature output or sensors that monitor both temperature and relative humidity—can provide many benefits to designers in a variety of industries.

    Details
  • Introduction to the characteristics and differences between PCB boards and integrated circuits
    Introduction to the characteristics and differences between PCB boards and integrated circuits
    Source: Release time:2019-09-02 Click:54

    An integrated circuit generally refers to the integration of a chip, such as a north bridge chip on a motherboard. Inside the CPU, it is called an integrated circuit, and the original name is also called an integrated block. The printed circuit refers to the circuit board we usually see, and the solder chip is printed on the circuit board. From this article, you will know more about them, so read the article carefully.

    Details
  • Common Fault Analysis of Filter Capacitors
    Common Fault Analysis of Filter Capacitors
    Source: Release time:2019-08-28 Click:47

    From this article, you will know more Filter Capacitors. Meanwhile you can get the answer for common faults in filter capacitors

    Details
  • Circuit breaker composition
    Circuit breaker composition
    Source: Release time:2019-08-16 Click:141

    Many people have seen Circuit breaker, then from this article, you will know more about it.

    Details
  • The difference between chip resistor and plug-in resistor
    The difference between chip resistor and plug-in resistor
    Source: Release time:2019-08-15 Click:68

    Resistance is widely used in life, but many people don't know much about it. This article will tell you the difference between chip resistor and plug-in resistor.

    Details
  • What are the physical sensors? How does the physical sensor work?
    What are the physical sensors? How does the physical sensor work?
    Source: Release time:2019-08-12 Click:58

    From this article, you will know more about physical sensors, if you are interested in it, you can't miss it.

    Details
  • Tencent and Intel collaborate to develop artificial intelligence enhanced cameras
    Tencent and Intel collaborate to develop artificial intelligence enhanced cameras
    Source: Release time:2019-08-05 Click:85

    Chinese technology giant Tencent has partnered with Intel to develop artificial intelligence-enhanced cameras to provide insight into the retail environment.

    Details
  • The reason why the power adapter is hot
    The reason why the power adapter is hot
    Source: Release time:2019-07-31 Click:64

    When the phone is out of power, we will charge the phone. During the charging process, many people don‘t understand why the charger is so hot. This article tells you the answer.

    Details

Hot News