The SS94A2 from HONEYWELL manufacturer is a Magnetic Sensors - Linear, Compass (ICs) with Board Mount Hall Effect / Magnetic Sensors Analog Position 6.6vdc - 12.6vdc.
The SS94A2 is The SS9 utilizes a Hall effect integrated circuit chip which provides increased temperature stability and performance. Laser trimmed thick film resistors on the ceramic substrate and thin film resistors on the integrated circuit reduce null and gain shifts over temperature which results in consistent sensitivity from one device to the next. APPLICATION CONSIDERATION: The output is clamped at the high end. Clamping voltage may be as low as 9 Vdc. The output will not exceed the clamping voltage re HallLinear Analog RoHSconf Analog Position Sensor 3-Pin SIP IC, HALL EFFECT TRANSDUCER; Hall Effect Type:Linear; Output Current:1mA; Sensor Case Style:SIP; No. of Pins:3; Supply Voltage Range:6.6V to 12.6V; Operating Temperature Range:-40°C to +125°C; SVHC:No SVHC (19-Dec-2011); Base Number:94; IC Generic Number:94; Logic Function Number:94; Operating Temperature Max:125°C; Operating Temperature Min:-40°C; Package / Case:SIL; Supply Voltage Max:12.6VDC; Supply Voltage Min:6.6VDC; Termination Type:Through Hole LOHET II noise shielded hall effect IC Commercial Solid State/Magnet Hall Effect Sensor; Sensor Terminals:Through Hole; Supply Voltage Max:12.6VDC; Supply Voltage Min:6.6VDC; Current Rating:30mA; Mounting Type:Through Hole; Operate Point Max:500G; Operate Point Min:-500G; Operational Type:Sink/Source ;RoHS Compliant: Yes IC, HALL EFFECT TRANSDUCER; Hall Effect Type:Linear; Voltage, Supply Min:6.6V dc; Voltage, Supply Max:12.6V dc; Termination Type:Through Hole; Case Style:SIL; No. of Pins:3; Temp, Op. Max:125°C; Temp, Op. Min:-40°C; Base Number:94; IC Generic Number:94; Logic Function Number:94; Operating Temperature Range:-40°C to +125°C 1MA MAX OUTPUT SUBMINI NOISE SHIELDED 3PIN INLINE PCB TERM Linear Position Sensor 12.6V Analog(Voltage) Output 3-Pin SIP Sensor: Hall; Package: SIP; Uin:6.6 to 12.6V; Temp: -40 to 125°C SENSOR LINEAR ANALOG CSIP Sensors, Magnetic Position Sensors, PCB level Position Sensors (Ceramic package - Linear Hall) Hall-Effect Linear Positi ANALOG POSITION 6.6VDC - 12.6V . More details for SS94A2 can be seen below.
Details
The SS9 utilizes a Hall effect integrated circuit chip which provides increased temperature stability and performance. Laser trimmed thick film resistors on the ceramic substrate and thin film resistors on the integrated circuit reduce null and gain shifts over temperature which results in consistent sensitivity from one device to the next. APPLICATION CONSIDERATION: The output is clamped at the high end. Clamping voltage may be as low as 9 Vdc. The output will not exceed the clamping voltage re
HallLinear Analog RoHSconf
Analog Position Sensor 3-Pin SIP
IC, HALL EFFECT TRANSDUCER; Hall Effect Type:Linear; Output Current:1mA; Sensor Case Style:SIP; No. of Pins:3; Supply Voltage Range:6.6V to 12.6V; Operating Temperature Range:-40°C to +125°C; SVHC:No SVHC (19-Dec-2011); Base Number:94; IC Generic Number:94; Logic Function Number:94; Operating Temperature Max:125°C; Operating Temperature Min:-40°C; Package / Case:SIL; Supply Voltage Max:12.6VDC; Supply Voltage Min:6.6VDC; Termination Type:Through Hole
LOHET II noise shielded hall effect IC
Commercial Solid State/Magnet
Hall Effect Sensor; Sensor Terminals:Through Hole; Supply Voltage Max:12.6VDC; Supply Voltage Min:6.6VDC; Current Rating:30mA; Mounting Type:Through Hole; Operate Point Max:500G; Operate Point Min:-500G; Operational Type:Sink/Source ;RoHS Compliant: Yes
IC, HALL EFFECT TRANSDUCER; Hall Effect Type:Linear; Voltage, Supply Min:6.6V dc; Voltage, Supply Max:12.6V dc; Termination Type:Through Hole; Case Style:SIL; No. of Pins:3; Temp, Op. Max:125°C; Temp, Op. Min:-40°C; Base Number:94; IC Generic Number:94; Logic Function Number:94; Operating Temperature Range:-40°C to +125°C
1MA MAX OUTPUT SUBMINI NOISE SHIELDED 3PIN INLINE PCB TERM
Linear Position Sensor 12.6V Analog(Voltage) Output 3-Pin SIP
Sensor: Hall; Package: SIP; Uin:6.6 to 12.6V; Temp: -40 to 125°C
SENSOR LINEAR ANALOG CSIP
Sensors, Magnetic Position Sensors, PCB level Position Sensors (Ceramic package - Linear Hall)
Hall-Effect Linear Positi
ANALOG POSITION 6.6VDC - 12.6V
- Categories
- Other Components
- Manufacturer
- Honeywell Solid State Electronics Center
- Veswin Part Number
- V2320-SS94A2
- Lead Free Status / RoHS Status
- Lead free / RoHS Compliant
- Condition
- New & Original - Factory Package
- Stock Status
- In-Stock Inventory
- Minimum order
- 1
- Estimated Delivery Time
- On May 01 - May 06 (Choose Expedited Shipping)
- EDA / CAD Models
- SS94A2 by SnapEDA
- Storage Condition
- Dry storage cabinet & Humidity protection package
- Voltage Supply
- 6.6 V ~ 12.6 V
- Type
- Linear
- Technology
- Hall Effect
- Supplier Device Package
- Ceramic SIP
- Series
- SS94
- Sensing Range
- ±50mT
- Resolution
- -
- Packaging
- Bulk
- Package Case
- 3-SIP
- Output Type
- Analog Voltage
- Operating Temperature
- -40°C ~ 125°C (TA)
- Operating Supply Voltage
- 12 V
- Operating Supply Current
- 30 mA
- Mounting Style
- Through Hole
- Minimum Operating Temperature
- - 40 C
- Maximum Output Current
- 1 mA
- Maximum Operating Temperature
- + 125 C
- Features
- -
- Current Supply Max
- 30mA
- Current Supply
- -
- Current Output Max
- 1mA
- Bandwidth
- -
- Axis
- Single
Looking for SS94A2? Welcome to Veswin.com, Our Sales are here to help you. You can get components availability and pricing for SS94A2,
view detailed information that including SS94A2 manufacturer and datasheets. You can buy or learn about SS94A2 right here, right now.
Veswin is an electronic component distributor for commodity, common, obsolete / hard to find electronic components. Veswin supplies Industrial,
Commercial and Mil-Spec components to OEM customers, CEM customers and Repair Centers worldwide. We maintain a large inventory of electronic components,
which may include SS94A2, on hand to ship same day or short lead-time. Veswin Company is a full service SS94A2 supplier and distributor for SS94A2.
We have the ability to source and provide the SS94A2 globally to assist you with your electronic component supply chain. now!
- Q: How To Order SS94A2?
- A: Please click on the "Add to Cart" Button and then proceed to checkout.
- Q: How To Pay for SS94A2?
- A: We accept T/T(Bank wire), Paypal, Credit card Payment through PayPal.
- Q: How Long Can I Get The SS94A2?
-
A: We will ship via FedEx or DHL or UPS, Normally will take 4 or 5 days to arrive at your office.
We can also ship via registered airmail, Normally will take 14-38 days to arrive at your office.
Please choose your preferred shipping method when checking out on our website.
- Q: SS94A2 Warranty?
- A: We Provide 90 days warranty for our product.
- Q: SS94A2 Technical Support?
-
A: Yes, Our product technical engineer will help you with the SS94A2 pinout information, application notes, replacement,
datasheet in pdf, manual, schematic, equivalent, cross reference.
VESWIN ELECTRONICS QUALITY ASSURANCE
Quality Systems Registrar, certified Veswin Electronics to ISO 9001 standards. Our systems and compliance with the standards have been, and continue to be, regularly reviewed and tested to maintain continuous conformance.
ISO CERTIFICATION
The ISO registration gives you an assurance that Veswin Electronics's systems are accurate, comprehensive and conform to the rigorous requirements of the ISO standard. These requirements ensure Veswin Electronics's long-term commitment to continuous improvements.
Note: We do our best to ensure correct product data appears on our website. Please refer to the product datasheet/catalog for confirmed specifications from the manufacturer before ordering. If you spot an error, please notify us.